FAA Inspection Authorization Practice Test

These questions are part of the practice quiz. Start practicing

• Which would typically not be used as approved data for a major appliance alteration?
• Which action ensures ongoing airworthiness after a change in status before the next inspection?
• Which of the following is not typically included in airworthiness limitations for Part 23 airplanes?
• Which of the following is included in Special airworthiness certificate categories?
• Which statement best describes how the terms 'overhauled' and 'rebuilt' are applied under Part 43?
• What two conditions must be present for an aircraft to be considered airworthy during IA assessment?
• Under the privileges of an IA, a major alteration performed under AAIP (Part 135) may be approved for return to service if the work was accomplished in accordance with
• What is the IA’s role when an approved data sheet or manual is updated?
• Which document specifies the scope and detail of the items in the annual inspection checklist?
• Which sequence correctly describes the best choice for the first part of a progressive inspection?
• How should time-in-service be tracked when an IA signs off work?
• Who may sign off an annual inspection for a US-registered aircraft located in Canada when the aircraft is under US certification?
• FAR Part 1 Definitions Which of the following would not be considered Maintenance?
• When considering another alteration to be made in accordance with a supplemental type certificate (STC), the approving mechanic with inspection authorization must ensure?
• FAR Part 39 governs which of the following?
• Which must exist for IA to be valid?
• What is the purpose of FAA Form 337?
• Why is it important for IA to understand the aircraft’s design and certification basis?
• What is required regarding base of operations for an IA holder?
• Which statement best describes the purpose of the internal post-maintenance inspection regarding parts and workmanship?
• What is the importance of a safe and clear safety-of-flight mindset in IA practice?
• According to FAR 23, which item would be included in the instructions for continued airworthiness for computer category only?
• Which Canadian maintenance entity may approve a major repair or major alteration to US-registered aircraft?
• Select the statement which identifies one of the privileges of a mechanic who holds an IA.
• What is a key consideration regarding approved data when performing a modification review?
• As specified in FAR Part 43, which of the following inspections would be the first part of progressive inspection?
• Which action best describes how an IA contributes to aviation safety culture within a maintenance organization?
• A relocation of a battery follows STC guidelines, but the battery is located 6 inches aft of the STC location and the aft center-of-gravity limit is exceeded by 0.1 inch. Concerning the installation, which statement is true?
• If a repair uses data beyond approved sources, how should it be treated?
• Under FAR Part 27, which rotorcraft categories does the standard apply to?
• What is a field approval and when might it be encountered?
• How does the IA demonstrate ongoing compliance during continuous operations such as a performance improvement program?
• An Aircraft with a special airworthiness certificate should be in which of the following categories?
• Under maintenance-recording requirements, which items must be documented in the aircraft’s maintenance records?
• Part 23 prescribes airworthiness standards for which categories of airplanes?
• How often should IA knowledge and currency be refreshed?
• Minimum number of annual inspections for renewal after one year?
• Which item is NOT within the privileges of an inspection authorization?
• What general experience is typically required to qualify for IA eligibility?
• An IA inspecting a fabric-covered airplane finds the cover recently replaced with a synthetic cover, with only grade A material certificated. This change would constitute a
• Aircraft certificated under 14 CFR part 23 must have airworthiness limitations including which item?
• In addition to Appendix D, which aircraft type requires rotorcraft-specific items during an annual inspection?
• Which action best ensures ongoing airworthiness during recalls?
• Which statement best defines a major alteration or major repair for IA purposes?
• Who may approve and sign off a major alteration or major repair?
• What is a Progressive Inspection Program (PIP) and who approves it?
• Which statement correctly describes the relationship between Airworthiness Directives (ADs) and Service Bulletins (SBs)?
• What is the IA's responsibility when an aircraft’s airworthiness status changes between inspections?
• A small aircraft with a standard airworthiness certificate modified for a supplemental type certificate designed for restricted special purpose operation. As the IA inspector you would
• When weighing an aircraft certificated under 14 CFR Part 23 to determine empty weight and center of gravity, which fluids should be part of the empty weight?
• An Aircraft with a standard airworthiness certificate should be in which of the following categories?
• Can the IA delegate tasks, and if so, what remains their responsibility?
• Which two items are typically shown in the airworthiness limitations section?
• What is a renewal criterion involving major repairs or major alterations?
• Which data could be used as approved data for a major repair?
• Of the following certificated operators' aircraft, which may the IA not approve for return to service after a major repair or alteration?
• If an alteration is listed in FAA aircraft specifications for the aircraft, how is it treated for return to service?
• In a scenario with multiple technicians working under approved data, what must the IA verify before sign-off?
• An IA ceases to be effective under which condition?
• The maintenance manual contains required maintenance, as listed in the airworthiness limitation section. This section must include: 1) Mandatory replacement times 2) Structural inspection intervals and inspection procedures. Which statement is correct?
• The Certification Basis listed on the Type Certificate Data Sheet is significant to the IA conducting the annual inspection because it determines
• What is a key consideration when signing off a progressive inspection segment?
• Which Canadian maintenance entity may approve data for major repairs to US-registered aircraft?
• Which of the following is the holder of an inspection authorization privilege to perform?
• If you as the holder of an inspection authorization were approached by an aircraft owner and asked to replace the engine on the aircraft with one of a different make and horsepower rating, which of the following would you consult first in determining acceptability?
• When inspecting a major alteration for conformity and return to service, the IA must determine that the data used is
• Which item is included in the airworthiness limitations section for Part 23 airplanes?
• What must the holder of an inspection authorization do before exercising privileges after changing base?
• What is the purpose of the IA's internal post-maintenance inspection?
• Which category is NOT included under Part 23 airworthiness standards?
• How is the aircraft’s airworthiness status maintained during continuous operations (PIP or ongoing programs)?
• Aircraft certificated under 14 CFR part 23 must have airworthiness limitations including which item?
• 14 CFR, and 65.95 prescribes the
• What is involved in the IA’s review of an avionics or electrical modification?
• Which of the following is the recommended data source for inspecting a helicopter main rotor gearbox?
• A modification that, if listed in FAA Aircraft Specifications, would cause a major alteration to be treated as minor.
• Advisory Circulars, in the context of major repairs, are considered approved data for major repairs?
• The overhaul of a system or component of an aircraft on a progressive inspection program is considered to be what type of inspection?
• Under the privileges and limitations of the inspection you could?
• Time in Service for turbo-prop airplanes is defined as which?
• In addition to aircraft types such as Normal, Utility, Acrobatic, Commuter, and Transport, the Standard airworthiness certificate includes which of the following?
• As specified by FAR Part 43, which of the following inspections would not be part of a progressive inspection program?
• Title 14 CFR Part 23 prescribes airworthiness standards for which category of airplanes?
• What is the consequence of failing to verify repair data against approved data when signing off?
• If an AD requires action but the aircraft cannot be safely operated to complete the action, what should the IA do?
• What documentation is required for a major alteration or repair?
• What is the IA’s responsibility regarding nonconforming parts or workmanship?
• Data developed for and incorporated in a supplemental type certificate is considered approved data for major repairs?
• Under Part 27, a rotorcraft with a maximum gross weight of 7,000 pounds is categorized as which?
• The renewal rules are governed by which CFR part?
• How does an IA assess the potential impact of a modification on weight and balance?
• Title 14 CFR Part 23 prescribes airworthiness standards for which of the following?
• Under 14 CFR Part 43, which term is used for a component that has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested to the same tolerances as a new item?
• In CFR 14 Part 23, which information is required for airworthiness limitations?
• What should an IA do if a technician disputes a determination of 'major' vs 'minor'?
• Alterations of the type found in 14 CFR Part 43 Appendix A are major alterations, except when listed in which document?
• Replacing fabric with synthetic covering on a fabric-covered airplane is classified as which?
• What constitutes complete, traceable maintenance records during IA audits?
• When may a circuit remain energized with the master switch open? When the circuit
• Which would be considered maintenance?
• When may the holder of an IA approve for return to service a major repair that is recorded on FAA Form 337?
• Under 14 CFR Part 43, which term is used for an engine that has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested per approved standards?
• Which appendix in 14 CFR part 43 contains several appendices that deal with maintenance, inspection, repair, alteration, and recordation, and identifies which alterations are major?
• Which of the following would the empty weight center of gravity be calculated with full oil included?
• An aircraft has a cracked aileron control bracket. To restore the aircraft to an airworthy condition, a certificated airframe mechanic reinforces the bracket. This procedure would constitute a
• Can an IA participate in progressive inspections?
• What is the IA's obligation after maintenance when new airworthiness information arises?
• What data must be used for major repairs or alterations signed off by IA?
• Who approves a Progressive Inspection Program (PIP)?
• For an appliance major repair, which data could be used without further approval?
• According to Part 43, how is an aircraft engine that has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested in accordance with approved standards classified?
• An amateur-built aircraft with an experimental airworthiness certificate requires what type of inspection?
• How does an annual inspection differ from a 100-hour inspection in terms of purpose?
• How should an IA respond to a field issue that may impact airworthiness?
• When weighing an aircraft certificated under civil air regulations, Part 3, to determine empty weight and center of gravity, which of the following must be included in the empty weight?
• What is the IA’s role in ensuring compliance with manufacturer data during maintenance?
• FAR Part 21 addresses which topic?
• What part of the 14 CFR referenced in section 65.95(a)(1) contains the standards of performance under which IA performs?
• If maintenance reveals new safety information requiring modification, what should the IA do?
• What is the primary purpose of FAA Inspection Authorization (IA) and what authority does it grant the holder?
• If Va is not given, which speed should be used as the operating maneuvering speed?
• Which statement best describes the IA's role with respect to compliance with manufacturer data?
• How does a maintenance organization demonstrate IA compliance during FAA audits?
• Which statement best describes Appendix A's role in Part 43?
• Minimum renewal activity for IA after 1 year period?
• As an IA, you are performing an annual inspection on an aircraft and noticed that the N # is not displayed on the aircraft. The owner says the N # is pending and he will not fly the aircraft until it is on the aircraft. As the IA, what is your responsibility in the situation?
• An airplane certificated in the utility category must have an airspeed placard in clear view of the pilot and as near as practical to the airspeed indicator listing what information?
• What role does IA play in ensuring proper recall actions are completed?
• What documentation is required to accompany a major alteration when applicable?
• If an AD requires action and the operator completes it, what documentation should IA ensure?
• Appendix A for continued airworthiness is associated with which Part?
• Which CFR sections govern an IA's authority to perform an annual inspection or supervise a progressive inspection?
• Under the IA privileges, the IA may supervise which type of inspection?
• During the review of an aircraft's records, while performing an annual inspection, you discover that the altimeter has not been inspected and tested within the preceding 24 calendar months. If the aircraft meets all other airworthiness requirements, as the inspection authorization, you should:
• If the effect of a modification on weight and balance is unknown, what should the IA do?
• How does an IA determine whether a repair is major or minor?
• Which action should an IA take if a tool is found out of calibration during maintenance?
• For a major repair, data used must be traceable to an approved source.
• IA expiration date according to FAR Part 65?
• What is the importance of maintaining tool calibration and records for IA work?
• Which statement best describes the purpose of total time tracking in IA oversight?
• Which items are within the privileges and limitations of the inspection authorization?
• Data from an aircraft specification used in the performance of an alteration would make the alteration
• Which action best preserves the integrity of logbook entries after maintenance?
• What is the IA's role in ensuring proper documentation for corrective actions after an unsafe condition is found?
• What is the role of the Minimum Equipment List (MEL) in IA decisions?
• Which regulations govern IA eligibility and authority?
• What is the consequence of an IA signing off work that was not performed to approved data?
• What constitutes 'approved data' for maintenance actions?
• Data used for approving major repairs must be FAA approved prior to its use. Which of the following is approved data for major repairs?
• Under 14 CFR Part 43 Appendix A, an operation is considered a major alteration unless listed in which document?
• When considering a major alteration to be made in accordance with a Supplemental Type Certificate (STC), what must the approving mechanic with inspection authorization ensure?
• According to FAR 23, which item would be included in the instructions for continued airworthiness for computer category only besides electrical loads?
• Which could perform an annual inspection on a US-registered aircraft located in Canada?
• Which document would you consult to determine whether an aircraft has an Instructions for Continued Airworthiness?
• Which of the following would the empty weight center of gravity be calculated with full oil not included?
• When performing an annual inspection of a helicopter main rotor gearbox, the inspection will be accomplished in accordance with which data?
• Aircraft certificated after which date were required to have an approved flight manual?
• Which statement best distinguishes a defect from a service difficulty?
• Which of the following is a renewal activity option for IA?
• How must Airworthiness Directives (ADs) be treated during IA maintenance?
• The IA will cease to be effective when the holder no longer has
• The total time limit is used to determine which aspects of IA oversight?
• Which of the following statements is true regarding Part 23 airworthiness standards?
• Which activity is most critical to maintain ongoing airworthiness during ADs and recalls?
• In which year pattern does the IA expiration follow?
• Which of the following is not a privilege of the holder of an inspection authorization?
• If the IA delegates tasks, what must the IA ensure?
• Minimum renewal requirements for IA that has been in effect for one year?
• Which document should IA maintain when an AD action cannot be completed due to safety concerns?
• In 14 CFR Part 43 Appendix A, which document, if the alteration is listed in it, would cause the operation to be considered a minor alteration?
• How should IA treat recalled or service campaign items?
• A maintenance manual is approved date of when... Which statement describes the data status when a manual includes an airworthiness limitation section?
• What does recertification refer to in IA oversight?
• 14 CFR Part 27 prescribes airworthiness standards for which rotorcraft?
• Data developed by a repair station and approved by the operator is approved data for major repairs?
• Who must be notified before the inspection authorization may exercise privileges after changing fixed base?
• When maintenance is updated due to new AD information, what should IA do?
• Which section of title 14 CFR provides for the fabrication of aircraft replacement and modification parts?
• For an appliance major alteration, which could be used as approved data?
• After an annual inspection, if the aircraft is found unairworthy, the Title 14 CFR requires that a list of discrepancies be given to whom?
• For an appliance major alteration, which of the following data could be used without further approval?
• What does the requirement of retention for life of the aircraft mean for maintenance records?
• Which part of Title 14 CFR would you consult to determine airworthiness standards for normal category airplanes?
• How does the IA handle data integrity when multiple technicians are involved in a single task?
• Which Canadian maintenance entity may perform an annual inspection on a US-registered aircraft?
• How should a major alteration affect the aircraft’s documentation file?
• Which part of Title 14 CFR prescribes airworthiness standards for issue of type certificates and changes for airplanes in the normal, utility, acrobatic, and commuter categories?
• Where would you locate instructions for continued airworthiness for a rotorcraft?
• A person holding an inspection authorization (IA) may perform an annual inspection and approve Aircraft for return to service. The IA may also supervise the performance of which of the following?
• Time in Service for Turbo-Propeller Powered Airplanes Is Defined As
• Each person performing an annual inspection must use a checklist; in addition to the items in the appendix, rotorcraft require additional specific items. Which aircraft type fits this requirement?
• Under civil air regulations Part 3, which combination best describes the required contents of empty weight?
• Which element best demonstrates that an IA's documentation accurately reflects work performed?
• For an appliance, the manufacturers manual could be used as approved data for which of the following?
• What is the purpose of FAA Form 337 in relation to major work?
• Who has primary responsibility for determining if a repair or alteration is major or minor?
• What information must be included in a logbook entry when an IA signs off an annual?
• What is the IA's responsibility regarding safety and operation before completion of an AD action?
• What is the IA's obligation regarding maintenance records when records are incomplete and no approvals are available?
• The type certificate data sheet will provide information concerning the Certification Basis for the aircraft which could be used to determine if the Aircraft has 1) a required flight manual 2) Instructions for Continued Airworthiness. Which statement is correct?
• What must an IA verify to ensure maintenance complies with the Type Certificate Data Sheet (TCDS)?
• Certification procedures for products and parts are found in which Part of title 14 CFRs?
• Which Part contains airworthiness standards for Normal Category Rotorcraft?
• What must be documented in logs when an IA signs off an annual besides date and time in service?
• FAR Part 43 covers which areas?
• How do Service Bulletins (SBs) differ from Airworthiness Directives (ADs)?
• For aircraft that have Instructions for Continued Airworthiness, which section is approved by the FAA?
• When reviewing major alterations, which document should be consulted to confirm the alteration's installation limitations and design data?
• A certificated mechanic holding an inspection authorization is not permitted to
• Which document is used to describe a major repair when approving for return to service?
• AFM stands for?
• What is the IA’s role in ensuring safe operating condition after maintenance?
• Which form or documentation is applicable to support a major alteration sign-off?
• Which of the following is not a characteristic of a standard airworthiness certificate?
• How should an IA approach unapproved sources of data found during maintenance?
• How should the IA handle airworthiness information that appears after a maintenance event?
• How does IA ensure record integrity after making a logbook entry?
• If there is a discrepancy between repair data and what is installed on the aircraft, what should the IA require?
• During an annual inspection, which statement about manufacturers' service bulletins is correct?
• Which statement best describes the Type Certificate Data Sheet?
• Which document contains essential product information used to determine installation compatibility?
• What documentation is required for a sign-off involving a major alteration or repair?
• Form 337 which document is used to document FAA-approved major modifications and alterations?
• Major alteration data must be
• For aircraft manufactured prior to March 1, 1979 that do not have an approved flight manual (AFM), which of the following is true?
• Where IA has been in effect for less than 90 days needs to have performed
• What inspections may an IA perform or sign off?
• Which statement best reflects the data status when a maintenance manual includes an airworthiness limitation section?
• Under the privileges of an inspection authorization, the holder may approve for return to service any
• Which action is most authoritative when determining if a modification to a product is compatible with existing installation?
• Which rotorcraft system is specified by FAR Part 43 to be inspected only by the maintenance manual or instructions for continued airworthiness as provided by the manufacturer concerned?
• Under 14 CFR Part 23, what type of circuit protective device is required for starter motors?
• Which fluid is described as undrainable in the empty weight calculation under civil air regulations Part 3?
• How should an IA document recall actions?
• According to Part 43, how is a component part that has been disassembled, cleaned, inspected, repaired as necessary, reassembled, and tested to the same tolerances and limits as a new item classified?
• How should an IA respond to incomplete or missing maintenance records?
• What is the role of FAA Form 337 in major alterations or repairs?
• What is the correct marking for fuel type on decals under the fuel filler caps on a Part 23 single-engine airplane?
• The holder of an inspection authorization may not approve a major repair for return to service unless